Health care law case Essay Example | Topics and Well Written Essays - 1000 words

Health care law case - Essay Example Mr Segedy appealed the comparative negligence verdict and the new trial order. Mrs Segedy suffered from lung and heart problems with likely causative agents emanating from rheumatic fever. She visited Dr I. Ibrahim who diagnosed her with mitral stenosis on June 2001 and on 21st September 2001 her cardiologist performed catheterization of the heart to evaluate the problem further. She was placed for heart surgery on 24th September 2001 by DR Netzley after he was consulted by her cardiologist. Mrs Segedy excused herself to visit her children before the surgery though she had been advised to remain in the hospital by her cardiologist. The operation was performed on Monday and after Dr Netzley determined that she was stable, he placed her in the ICU. However this did not work out as the heart malfunctioned rendering Dr Netzley to refer Mrs Segedy back to the operation room. She was placed under life support machine until 28th September 2001. The surgeon and the nurses did every little thing that would have been done by any responsible neurosurgeon to ensure the life of Mrs Segedy was not a risk. Mr Segedy sued Dr Netzley and company, Dr. Ibrahim and corporation and Summit Pulmonary and internal medicine Inc. for medicinal negligence. Mr. Segedy argued that Dr. Ibrahim failed the standard of care by failing to properly complete or reschedule a bronchoscopy, proximately causing Mrs Segedys death through a delay in diagnosis. He accused Dr Netzley of standard of care violation through transferring his wife from the operating room before she regained stability and failing to return her to the operation room immediately for appropriate medicinal care causing his wife’s death. The verdict was in favor of Dr Ibrahim thus he is not party to the appeal. The jury returned a verdict against Dr Netzley of amounts of $1,755,300 but was not supported by all the judges in the panel. After several consultations, the jury gave

How Smart Phones are the New PC Research Paper Example | Topics and Well Written Essays - 750 words

How Smart Phones are the New PC - Research Paper Example The proceeding sections depict a detailed insight into this argument. II. Outline The paper discusses how the new technology ‘smart phones’ have given tough competition to personal computers by incorporating the features of a personal computer on a mobile phone. Traditionally, the cell phone did not offer many features except for simply text messaging and a call feature at most. However, with the passage of time, mobile phone manufacturers are incorporating a variety of tasks and functions to enhance the user experience. This has resulted in an overlapping of the functions provided by smart phones and personal computers. The paper discusses the manner in which the mart phone technology has become the new personal computer and its scope in future. III. Content The term ‘smart’ phones refers to top of the line mobile phones that are built using a technology known as the â€Å"mobile computing platform† and that offers enhanced connection features and co mputing power compared to the traditional mobile phone (Jipping). The initial ‘smart’ phones incorporated simpler, less sophisticated technology such as the camera and features of the PDA (Ilyas and Ahson). However, with the passage of time, more complex features were incorporated including GPS, GPRS, media players and video/voice recording. Contemporary smart phones not only include these, but also technology such as touch screens, web browsers, Wi-Fi and high speed internet experience (Jipping). These features have enhanced the user experience and let to the popularity of smart phones, raising questions about the threat this shall impose to personal computers. The Smartphone technology can be compared to the Swiss Army Knife metaphor (Emigh). Thus, Smartphone bears resemblance to a knife in terms of compactness and ease of use. The new Smartphones are not just mobile phones; they intend to offer more than just the conventional texting and calling features. Unlike its predecessors, the Smartphone now offers features such as the GPS which helps users to navigate the area they are in, to find their way through malls and shopping centres as well as for frequent travelers who want to find their way through a new city (Hinch). Thus, clearly the new Smartphone is a comprehensive phone that offers a complex range of features all at one click. However, similar to a Swiss Army Knife, not all of the â€Å"blades† or features of the Smartphone may be useful to a particular user (Emigh). IV. Comparison Whether or not smart phones are the new pc has been a heavily debated topic in the IT industry. According to one author, the question boils down to whether the Smartphone is a new pc or is it s Swiss army knife in disguise (Emigh). Some experts have suggested that with the rising trend of innovative mobile applications and the development of a multitude of mobile operating systems, the Smartphone is fast becoming the new PC. (Wood, Northam and Gjertsen) An example to illustrate this point could be Verizon, which offers the â€Å"Motorola Driod Bionic† that offers the 4G platform (Tokuda, Beigl and Friday). The mobile comes with dual-core chips (resembling the dual core chips in personal computer processors) (Hunn). Furthermore, mobile phones such as LG and Samsung boast of having models that offer processors as fast as 1 GHz (Ilyas and Ahson). The â€Å"

Corrosion Resistance of Electrodeposited Coating

Corrosion Resistance of Electrodeposited Coating Qiongyu Zhoua,b, Yadong Zhanga, Xiaofen Wanga, Hebing Wanga, Ping Oua* aSchool of Materials Science and Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, PR China bInstitute of Applied Physics, Jiangxi Academy of Sciences, Shangfang Road 108, Nanchang, Jiangxi Province 330029, PR China Keywords: Ni-W alloy; Composite coating; Cr2O3nano-particles; Microhardness; Corrosion resistance 1. Introduction Mild steel is a most widely-used metal materials in engineering and industrial applications due to its low price and acceptable properties [1]. However, mild steel could not be suitable served in the harsh environment because of its highly susceptible to corrosion and mediocre mechanical strengths [2]. Failures (such as corrosion or wear) often occur on the surfaces of mild steel devices [3]. Therefore, preparation of an protective coating is one of the best known methods for broadening the application fields of mild steel [4, 5]. In recent years, electrodeposition technology has been widely used because it is really a convenient, practical and inexpensive method for engineering application [6]. Numbers of metal or alloy (such as Ni [7], Zn [8], Cr [9], Ni-W [10, 11], Ni-Co [12], Zn-Ni [13] et al.) have been  electrodeposited as the protective coating on the surface of mild steel. Among these coatings, Ni-W alloy coating has drawn lots of interests as a candidate to replace hard ch romium, because of its low toxicity for aquatic species [10]. In general, the purpose of researches on electroplated Ni-W alloy coating is how to enhance their hardness and corrosion resistance. Particularly, incorporation a second ceramic particles into the growing metal or alloy matrix during the electroplating process is a effective method. The composite coatings always exhibited enhanced mechanical and corrosion properties [14-17]. For this reason, a large amount of researches have been drawn on Ni-W nanocomposite coatings (Ni-W-Al2O3[18], Ni-W-SiO2 [19],Ni-W-TiO2[20], Ni-W-diamond [21] and Ni-W-SiC[22], et. al). The ceramic particles used as the second-phase in the composite coatings, more or less, would promote the corrosion resistance, hardness or wear-resistance [23-25]. Although nano-Cr2O3 particles  have been certified as a favorable and considerable incorporated ceramic particles in Ni or Co coating [26, 27], there is no report about nano Cr2O3 particles employed in electrodeposition of Ni-W nanocomposite coatings so far. In this p aper, in order to improve the performance of Ni-W alloy coating which is know as a environment friendly protective coating with excellent for mild steel, Ni-W-Cr2O3 nanocomposite coating was electrodepositied in the sulfate-citric bath containing various of Cr2O3 nanoparticles for improving both its hardness and corrosion resistance. Mild steel (1-1 cm2, Q235, Baosteel Co., Ltd. in Shanghai, China) was used as cathode and a platinum plate (1-1 cm2, Xianren instrument Co., Ltd. in Shanghai, China) was employed as the anode. The mild steel was mechanically polished by 800, 1200 and 2000 grit emery-paper and then ultrasonically cleaned in acetone for 600 s. The cleaned mild steel was activated in 10% (w/v) HCl solution for 30 s and then washed with distilled water. The base consist of electrolyte solution is as follows: 26.3 g/L NiSO4 ·6H2O, 98.95 g/L Na2WO4 ·2H2O, 147.05 g/L Na3C6H5O7 ·2H2O, 26.75 g/L NH4Cl, 0.3 g/L NaBr. Before electrodeposition, nano-Cr2O3 particles was added into the electrodeposition bath and then dispersed by ultrasonic concussion (3600 s) to break up agglomerates. The electroplating current density and time were 4 A/dm2 and 1800 s. 2.2. Coatings characterization The surface morphology was studied using a scanning electron microscope (SEM, JEOL JSM-6700F), supplied with an EDS spectrometer (Oxford Instruments, UK) for determining the chemical compositions of the coatings. The phase compositions of electrodeposited coatings were characterised by X-ray diffraction (XRD, D/max-2200) with Cu KÃŽ ± radiation, operating at 40 kV and 40 mA, scanning from 20 ° to 100 ° with the step of 0.02 °. The surface microhardness ofNi-W-Cr2O3 nanocomposite coatings were measured using a microhardness tester (VH-3) at an applied load of 9.8 N for 15 s, each sample was tesetd five times for averaging. The corrosion behavior of the obtained coating was evaluated in 3.5 wt.% NaCl solution by using an electrochemical workstation (CHI660E). All experiments were conducted in a conventional three-electrode cell (consisting of the electro-deposied coating as a working electrode, Pt sheet as a counter electrode and SCE as a reference electrode). The potentiodynamic polarization test (Tafel) of electro-deposied coating was tested from -800 mV to -400 mV with a scan rate of 1 mV, while mild steel was tested from -900 mV to -600 mV. Electrochemical impedance spectroscopy (EIS) was conducted at Ecorr, with voltage perturbation amplitude of 10 mV in the frequency range from 105 Hz to 10-2Hz. All electrochemical tests are carried out at room temperature (25 oC). 3.1 Characterization of nano-Cr2O3particles The characterization of nano-Cr2O3particles was carried out by using TEM and XRD analysis, the results are displayed in Fig. 1. It is showed that the particles are free of secondary phases except Cr2O3, which is consists of polyhedral structure with the mean diameter of about 40 nm. Inevitably, there are  some degree of agglomeration between the nano-particles. The composition of electroplated W alloy coatings can be analysed by EDS as the previous studies [28]. The W content and Cr2O3 in the electroplated coatings as a function of Cr2O3 addition in the electroplating bath are displayed in Fig. 2. The Cr2O3 content is corresponding to detected Cr element ratio in Ni-W-Cr2O3 nanocomposite coatings. As shown in Fig. 2, with the increase of Cr2O3 concentration in electroplating bath, the Cr2O3 particles incorporated in the coating increase rapidly when the Cr2O3 concentration is low (≠¤5 g/L). While it increases gradually when the Cr2O3 concentration is in range of 10-20 g/L. A deviation from the Langmuir adsorption behavior in the high Cr2O3 concentration solution is observed, which is caused by some particles would sedimentate by gravity in hydrodynamic conditions of without agitated. In addition, the results reveal that W content corresponding decreases with the increase of Cr2O3 addition in electroplating bath. This is because that th e sufficiently high overpotentials is in favour of deposition of W atom[29]. Once the Cr2O3 nano-particles adsorbed on cathode surface, it could form as nucleation sites and accordingly reduce the overpotentials. As a result, the deposition of W atom is inhibited, while Ni itself can also be deposited from its complex with citrate[30]. Fig. 3 shows the XRD patterns of the coatings electrodeposited in the bath with and without Cr2O3 nano-particles. In the bath without Cr2O3 nano-particles (shown in Fig.3a), the pattern of obtained coating consists of a broad peak from 41 ° to 47 °, indicating the amorphous nature of the Ni-W alloy coating. The amorphous structure should be electrodeposited under the pretense of the deposition rate is high compared to the exchange rate, which implies that all metal atoms are immediately discharged once they get to cathode surface. Thus, high content of W in the alloy must be observed, which is confirmed by the EDS result (45.8 wt.%, shown in Fig 2). What more, the amorphous characteristic also can be demonstrated by the SEM micrograph of Ni-W alloy coating (Fig.4a). As the results reported in the literatures by O. Younes [30] and T. Yamasaki [31], the electrodeposited Ni-W alloy coatings presented as an amorphous state when tungsten composition ranged from 20 to 40 at.%. While th e structure of deposited would transform once the Cr2O3 nano-particles existed in the bath, Ni-W-Cr2O3 nanocomposite coatings exhibit crystalline fcc structure of Ni-W alloy and Cr2O3 phases. The reason for this phenomenon is that the reduced overpotentials caused by the adsorbed Cr2O3 nano-particles on cathode surface would lead to deposition of crystalline phase, which is thermodynamically more stable than the amorphous phase [30]. Simultaneously, an unidentified peak at 2ÃŽ ¸Ã¢â€°Ë†41.4 is presented in the patterns of the Ni-W-Cr2O3 composite coatings. Similar peak have been observed by I. Mizushima et. al [32] and R. JuÃ… ¡k-nas et. al [33]. The former proposed that it is the codeposition of nanocrystalline Ni(-W) and Ni-W-C phases [32]. While R. JuÃ… ¡k-nas et. al claimed this peak corresponded to NiWO4[33]. However, so far this anomalous peak remains unidentified. As the increasing of Cr2O3 nano-particles addition in solution, the intensity for diffraction peak of Ni-W (111) i ncreases and unidentified line profile decreases, indicating that grain sizes of the Ni-W crystallites increase and the unidentified phase in the composite coatings gradual reduce. Fig. 4 shows the surface morphology of the coatings electrodeposited in baths containing different amount of Cr2O3 nano-particles. In all cases, the coatings are compact, uniform and crack-free, which can provide a barrier to protect substrate material. In comparison of Ni-W coating which shows a typical amorphous characteristic which is absence of grain boundaries, Ni-W-Cr2O3 composite coatings is consisted of irregular crystal structures, uniform distributed ultrafine Cr2O3 particles and some arresting big nodules, which is caused by Cr2O3 agglomerates codeposited with Ni-W as metal electrocrystallized. With the increase of Cr2O3addition in the solution, the Cr2O3 particles corresponding increase and the nodules trend to be unobvious. The reason may be that Cr2O3agglomerates become much more serious in the high concentration solution and then precipitate by settlement. Thus, the possibility for agglomerates absorbed on the vertically cathode surface and formation of nodules reduce during the electrodeposition process. Generally, homogeneous distribution of incorporated ceramic particles in composite coating would be benefit to enhance its properties [18]. 3.3. Microhardness The microhardnesses of Ni-W and Ni-W-Cr2O3 composite coatings are showed in Fig. 5. Compared with Ni-W coating (687 HV0.1), Ni-W-Cr2O3 composite coatings exhibite a considerable increase in microhardness (717~764 HV0.1). And the harness increase with the increase of Cr2O3concentration in the bath. Similar trend is usual observed in previous publication [18, 19]. The nano-particles incorporated in alloy coatings would positively contribute on the hardness by impeding the fast dislocation movement the grain boundary sliding of the matrix [19]. As a result, the hardness is direct relate to the incorporated Cr2O3particles in the coating, which increased with the Cr2O3 concentration in the bath ( as shown in Fig. 1). It is noted that the increase in hardness of the Ni-W-Cr2O3 composite coating are limited when the Cr2O3 concentration in the bath increase from 10 g/L to 20 g/L. As the research published previously, both W content and incorporated nano-particles would contribute to the hard ness of W alloy coating [11, 20]. With the increase of Cr2O3 concentration in bath, the increase of Cr2O3 in electrodeposited coating would result in increased hardness, However, the promotion of hardness performance would be limited by the contrary effects of decrease of W content in electrodeposited coating. 3.4 Corrosion resistance properties The corrosion resistance of electrodeposited coating was evaluated by polarization curves and EIS, the result displayed in Fig. 6 and Fig. 7, respectively. The corrosion parameters (Ecorr , icorr) extracted form polarization curves in Fig. 6 are listed in Table 1. It is revealed that both amorphous Ni-W coating and crystalline Ni-W-Cr2O3 nanocomposite coatings show noble Ecorrcombine with low icorr compared with mild steel substrate. This means, the compact electrodeposited coatings can provide an effective protection for mild steel substrate. A passivation region (-0.55V~-0.45V) is observed in the anode area of polarization curves for Ni-W coating. Passive layer is often formed on the surface of amorphous alloy and provide protective effect for prevent further corrosion [34]. Meanwhile, the Ni-W coating show a lowest icorr in all electroplated coatings, indicating a most excellent corrosion resistance. In addition, with the increase of Cr2O3 concentration in electroplating bath, the corrosion resistance of obtainedNi-W-Cr2O3 nanocomposite coating became better in view of a gradual increase of icorr. When the Cr2O3 concentration in the bath increased to 20 g/L, Ni-W-Cr2O3 nanocomposite coating show a fairly approximate icorr compare with that of Ni-W coating. The corrosion reaction and products at the electrode/electrolyte interface can be analysed by EIS measurements in conjunction with impedance fitting. Fig. 7 show Nyquist plots of mild steel and electrodeposited coatings obtained in baths with different amount of Cr2O3 nano-particles. The plots for electrodeposited coating and mild steel substrate are consist of a continuous circle arcs, meaning that aggressive ions (Cl) can not across the compact coating and only one primary interfacial reactions occured between the coating surface (or mild steel sample) and electrolyte. To model this corrosion behavior, suitable equivalent circuits showed in Fig. 8 was employed [35]. In this equivalent circuit, Rs is solution resistance, Cdl is double-layer capacitance formed in the substrate/electrolyte interface, CPE is a constant phase element for revealing the non-ideal dielectric properties of the coatings, and Rct is the charge transfer resistance of the coating (or substrate) interface, which relate to the intrinsic corrosion reaction of materials. The fitted values are listed in Table 2. As shown, Rct value of Ni-W-Cr2O3 nanocomposite coating electrodeposited in the bath containing 2 g/L Cr2O3is much smaller than that of Ni-W coating. This is because passive layer formed on Ni-W coating surface would prevent corrosion reaction, while no passive behavior have been observed for the crystalline Ni-W-Cr2O3 nanocomposite coating. What more, the Rct values of Ni-W-Cr2O3 nanocomposite coating increase with the increase of Cr2O3concentration in the bath, and the Rct value of Ni-W-Cr2O3 nanocomposite coating electrodeposited in the bath containing 2 g/L Cr2O3is quite close to the Rct value of the Ni-W coating, meaning that this Ni-W-Cr2O3 nanocomposite coating have an excellent corrosion resistance as amorphous Ni-W coating. Compact Ni-W-Cr2O3 nanocomposite coatings were electrodeposited on mild steel from sulfate-citrate bath containing Cr2O3nano-particles. Compared with Ni-W coating (687 HV0.1), Ni-W-Cr2O3 composite coatings exhibite a considerable increase in microhardness value (717~764 HV0.1). In addition, incorporation of little Cr2O3nano-particles into amorphous Ni-W coating would transform its structure to crystalline, which resulted in no passive behavior occurred on the coating surface and decrease of corrosion resistance. However, the corrosion resistance of Ni-W-Cr2O3 coating could be improved with the increase of Cr2O3concentration in the bath. Finally, a excellent Ni-W-Cr2O3 nanocomposite coating with approximate corrosion resistance and much higher hardness compared with Ni-W coating can be obtained in the bath containing 20 g/L Cr2O3nano-particles. This Ni-W-Cr2O3 nanocomposite coating can be considered as an ideal protective coating to broaden the application of mild steel.

prejudice in greek system Essay -- essays research papers

A major part of every college campus is the Greek system. Although, many times it goes unnoticed there is major segregation among the fraternities and sororities in the south. Why is such an important issue often overlooked? We need to be more aware of segregation because in many cases it causes conflict. What if an African American wanted to join a traditionally white fraternity or sorority or vise versa? The chances of him/her getting in are pretty slim. In fact, it would be most likely that they would not. The walls of race and the barriers from so-called ?traditions? in the Greek system should be broken in order to diversify the organizations and lead to the changes necessary to end segregation and discrimination for good.   Ã‚  Ã‚  Ã‚  Ã‚  The Civil War was over 130 years ago, and racial issues still stand even though it has been so long. It amazes me that discrimination and racism carries on today, especially among such younger generations such as college students. One would think that the younger generations would be more aware and more understanding of racial issues. After all it is these younger generations which were raised knowing that discrimination is wrong and everyone is equal no matter what their race or sex. Everywhere in the south a distinct separation between the black and white fraternities and sororities exists. Taking a look, even within the system ?the white fraternities belong to the InterFraternity Council, the white sororities to Panhellenic and the black Greeks to the National Panhellenic Council? (McCarthy). This separation only adds to the issue of racism and discrimination that continues to this day. Many of us think that it is not our problem or choose to ignore the issue. Many think that it is just the way it is; they are right, that is the way it is, but it does not have to be segregated. By sitting back and watching, we are agreeing with segregation and saying that it is okay. Efforts to conduct more interactions within the system and among chapters should be made. A director of Greek Life, Ron Binder, pointed out that ?we wanted to be the office of Greek Life, not the white office of Greek Life? (McCarthy). The Greek system in the north proves to be different than the south. There is no such thing as a ?black? or ?white? fraternity in the north. In the north you will find many African Americans and other minor... ...old student at Georgia Tech, is a promising one. Against the odds, he has faced the segregation issue head on, and joined a traditionally white fraternity known as Pi Kappa Phi, as the only African American. Even more uplifting is the fact that he is the president of the fraternity as well.   Ã‚  Ã‚  Ã‚  Ã‚  Maybe now we can see that segregation in the Greek system can be a problem. It is left not up one but to all to take a stand, step outside the boundaries, and acknowledge the fact that segregation and discrimination is wrong. There is a problem and as with all other problems it will not be solved on its own. It takes hard work and a genuine effort to make a difference. In no way is the racial separation among the fraternities and sororities helping to solve the worldwide issues of discrimination. Hopefully in the very near future we can look past the color of skin. Using something so petty as skin color to separate people is only holding us back. Those who still use skin color as a way to judge a person are living a life of ignorance. If we are unable to get past such an issue than we will never be able to grow as individuals and as a nation to our full potential.

Preparation For Life Education Is Life Itself Education Essay

Education is a lifetime procedure with no true beginning or stoping. Education consists of experience, environment, socialization and communicating. John Dewey assumed that â€Å" all echt instruction comes through experience. † I agree and believe that instruction does non get down and stop in a schoolroom. The instruction that we really receive is the amount of experience that we let ourselves to be exposed to. A It is the responsibility of an pedagogue to animate his pupils and enhance that desire to larn by the schoolroom environment that he creates. For Peters ( 1977 ) , instruction is non merely that what develop in person is of import but every bit good that it involves the growing of cognition and comprehension. Furthermore, apart from the schoolroom environment, the course of study, and the mode the schoolroom is managed are cardinal factors that contribute to the quality of instruction that a pupil receives. Like Jean-Jacques Rousseau ( 1712-1778 ) , I think that little categories, dwelling of 15 to twenty pupils are ideal for a good instruction. As this allows for a more friendly relationship between the instructor and the pupils and there is more clip for individualised direction that would let the pupils better success. A instruction doctrine gives insight into your basic beliefs of instruction and acquisition. It reveals the values you wish and want to convey to your scholars. My beliefs about acquisition and instruction are straight linked to my ain experiences as a trainee and a pupil every bit good. For the last two hebdomads as an perceiver in the instruction field, as a pre-service instructor, and as being a pupil for legion old ages, I have realised that there are four facets that make person an effectual instructor: teacher-student relationship, communicating, learning techniques, and uninterrupted acquisition. A positive and safe environment is contributing to effectual acquisition. A good instructor must possess learning accomplishments and the ability to efficaciously learn all sort of pupils. With the socio-economic alteration and the handiness of new information in the field of particular instruction, it is imperative to remain up to day of the month and unfastened minded. The values I want to convey to my pupils are that instruction is power and cognition is indispensable. Through instruction anyone can carry through anything in life. I do believe that non all kids are able to achieve the same educational degree but I do experience that every kid has his ain manner of understanding things that make sense to him. I hope to stress different ways to larn in my schoolroom which may include ocular, verbal and kinesthetic. I plan to integrate assorted methods throughout my learning experience. I want my pupils to be able to larn in every manner they are capable of. During my research I came across a great philosopher which I tend to hold with, John Dewey. Harmonizing to him, instruction is the â€Å" creative activity of cognition through enquiry instead than the transmittal of extant information † . Furthermore, he stated that â€Å" echt instruction is based on the experience of the scholar † . As a pupil, I spent school old ages larning in an improper manner. I was far from being an academically stand outing pupil since I literally did non cognize how to larn. Hence I could non understand how to travel through the most of import things which was necessary to retrieve that my instructors would desire me to cognize and understand. I realised that I learn by making and non by listening to talks. My doctrine is chiefly a combination of progressivism, behaviorism and existential philosophy. I like progressive attack as I understand that instructors need to be at that place for their pupils. Teachers act as a facilitator and a usher to their pupils. Students do necessitate to larn to make things on their ain and at their ain gait, yet with scaffolding. I become witting that pupils are non empty vass instead they possesses innately the â€Å" natural stuffs † and the get downing point of growing ( Dewey, 1934 ) . Dewey strongly agrees that instructors should steer pupil through experience but pupil should every bit voice their experiences ( Nodding, 2007 ) . I believe in the progressivism enterprise to do schooling both interesting and utile. Hence I intend to integrate group-work, field trips and organizing games in my category. Sometimes seeing is better than reading, and making an exercising is better remembered and understood than merely reading it. I besides like the doctrine of behaviourism because it provides positives supports like wagess and congratulations for good and coveted behaviour. This will promote motive, construct self-esteem and innate a feeling of self-responsibility within the pupils. However, to cover with riotous pupils sometimes, in utmost instances, instructors need to follow negative support like excess prep. Using existential philosophy, I want my pupils to be self expressive. There will be all types of pupils from slow, to average, to gifted. I want my pupils to ever experience like they can inquire inquiries and to be able to show their positions. I believe that acquisition is the procedure which a individual acquires knowledge through both direction and instruction. As a instructor my responsibility is to ease that this acquisition is taking topographic point for my pupils. Part of my aim as an pedagogue is to go through on the cognition presented in the class from their different beginnings like the text and other readings, talks and in category treatments. The method I will utilize or type of attack I will utilize to smooth the advancement of acquisition and apprehension are the chief elements of the instruction procedure. Therefore, the tools I will utilize will depend on a myriad of factors. For case, the class type, category size and capable affair. However, it happens that the attack one has envisioned is non needfully the right one, so alteration must be made on my side to relieve any job. For case, when seeking to do an abstract construct as more applicable with the existent fact, it may be required to hold several il lustrations at disposal. This is so as a frame of mention and consciousness may be different than the pupils. The in category talk is still an indispensable tool in the acquisition procedure but at the same clip develop an environment of critical thought and active acquisition. Engagement is a cardinal factor of the in category experience. It gives the pedagogue a signifier of day-to-day feedback from his category as a whole and every bit from each single pupil about the appreciation of capable affair covered in that session. No affair what philosophy person agrees with, all instructors should desire to convey out the best in all pupils and do certain that their pupils are acquiring every opportunity to be successful. If a pupil is non succeeding, we instructors must step in and do alteration as we can and hold the ability to do a difference.

Ethical Conflicts Essay

Because human services work often involves direct client interaction, there are times when the values of the worker differ from those of their clients. In these circumstances, ethical dilemmas tend to arise. Review the case examples and current ethical conflicts presented in Chapter 5 of your textbook. Choose (1) Case study :Social and Moral Issues in the Case of a 96-Year-Old Woman- page 141 96 years old woman live alone, Her house is full of trash .House is a health hazard with all the trash. bring on unwanted guess( rats which make the house unhealthy to live in). The house seem to be a fire hazard with all the trash in the house. The house has a bad order which has made a worker sick. The floor is in needed of repair , this can be unsafe for her one day. she slept in one room. The owner her nephew will not fix repairs. The stove is on and burning all day with trash on it. Doctors say she is mentally competent (1) Ethical conflict Will her right be taken away from her by removed her from her home. Is it right to leave her in a home that is unsafe for her to live. This is very difficult for one to choose but is it morally right to leave her in a house that you know is not safe. Should her nephew be held accountable for his home. To discuss, and present the dilemmas involved in each case. As a human services professional, how would you handle these situations? How would you balance your values as a professional with a client’s needs? Well for one she is unsafe in her home . I would have the house inspected by the city to confirm that its not safe for her. My balance I think would be to stay focus she 96 maybe it is time for her to have some one look after her and still give her independence. If she was a child living under those condition a worker would remove her from the home until it is improve. To me in my opinion she needs to be safe Schram, BRMB, Introduction to Human services : Policy and Practice, Eight Edition Values, Skills, and Knowledge To work in the field of human services, individuals must possess a unique blend of personal and professional values, skills, and knowledge. Using Table 4.1 as a reference, provide an overview of the structure and content of the helping relationship. Discuss the characteristics of an effective human service worker in relation to the A.S.K. pyramid, describe how each of these levels of the pyramid are of equal importance in human services, and explain how this differs from other fields. How would clients be disadvantaged, for example, by an unsympathetic, inflexible, unskilled worker? Working in this field we will need to have the knowledge of the A.S.K pyramid. The pyramid has three different parts. Knowing and using all three will help you in this field of work. The three parts are 1 Knowledge-is about human growth and social problems. people 2-Skiills- being able to be an good listener, while interviewing and watching your surrounding for clues while collecting data 3 Attitude- Having empathy and try to be very patience , be willing to help without judging. In order to give our best, we must apply A.S.K in your work field . We work with people which sometime can be trying every day. No one is the same. We as social worker will have an affect on by working close with them. We will be working to help change lives more so than other fields. A client would be disadvantaged by and unsympathetic, inflexible , unskilled worker because they would not show empathy nor have the patient that they would need . They would not have the knowledge that is need to help them, I believe they would not even listen they would just judge.

The Hamlet in Me essays

The Hamlet in Me essays Whether we are planning to build a boat or hoping to write a good essay, the only way to go about these tasks is to make a detailed plan of all the steps that need to be taken in order to get the desired result. If you spontaneously decide to build a boat, the result may be a plywood tub that leaks from all sides, let alone hold anyone in it. Hamlet, a seventh century story put to life through the amazing writing of Shakespeare, is a play that shows how meticulous and well thought out plans will bring about the desired result. The plays main character, Hamlet, is a Renaissance man that struggles with the corrupt world around him. He must deal with such issues like "blood for blood revenge" when his own uncle kills his father and takes his place as king. A ghost king appears to Hamlet and catalyzes the events that follow in the play. Hamlet must devise a plan to take revenge for his father and bring to justice all the people who have marred the situation. Though the church mandates through its moral code that Hamlet not take revenge, Hamlet tries to find the worst fate for his devious uncle possible: "Now might I do it, now he is a-praying, And now I'll do't and so he goes to heave...When he is drunk asleep, or in his rage, or in th' incestuous pleasure of his bed...Then trip him...And that his soul may be as damned and black As hell, whereto it goes" (3.4.77-100). Hamlet finally gains the nerve to kill his uncle, but sheaths his sword when he realizes that if he kills him while he is praying, his uncle will ascend to heaven. He ultimately decides to kill his uncle when he commits a sin, so that his soul "may be as damned and black as hell." He goes through a meticulous thought process, which shows him both his options and when to act to give his uncle the most cruel and horrible death he deserves. His actions also bring in a conflict between church and the revengeful calls of his families past. I ...